STUDI SIMULASI PENGARUH VARIASI UKURAN PIEZOELEKTRIK DAN KEBISINGAN LOKOMOTIF KERETA TERHADAP TEGANGAN DENGAN MENGGUNAKAN ANSYS

Authors

  • Ilham Satrio Utomo politeknik perkeretaapian indonesia madiun
  • Henry Widya Prasetya politeknik perkeretaapian indonesia madiun
  • Moch Aziz Kurniawan politeknik perkeretaapian indonesia madiun

DOI:

https://doi.org/10.37367/jpi.v4i2.106

Keywords:

Noise, Pressure, Piezoelectric, Locomotive, Train, Voltage

Abstract

The purpose of this study was to determine the effect of variations in electrical piezo size and train locomotive noise to the voltage generated using ANSYS. Pezoelectric Size variations used are 1x1, 3x3, 5x5 (cm). As for the noise variations used are 93, 96, 98, 100 (dB). The method used is the numerical method; in this case Finite Element Analysis (FEA) with the help of ANSYS Static structural program. The results showed that using piezoelectric 5x5 cm and at 100 dB noise produced a maximum voltage of 158.12 mV.

Downloads

Download data is not yet available.

References

K. Riahi, V. Krey, D. McCollum, P. Kolp, and Y. Nagai, “Transport electrification: A key element for energy system transformation and climate stabilization,” Clim. Change, vol. 123, no. 3–4, pp. 651–664, 2013.

P. J. Remington and M. J. Rudd, “Measurement and diagnosis of locomotive noise,” J. Acoust. Soc. Am., vol. 59, no. S1, pp. S80–S81, 2005.

Y. Yuan, B. Du, Y. Rasim, X. Zhang, C. Wang, and Z. Zhang, “Design, modelling and practical tests on a high-voltage kinetic energy harvesting (EH) system for a renewable road tunnel based on linear alternators,” Appl. Energy, vol. 164, no. October 2015, pp. 152–161, 2015.

Z. Zhang et al., “A high-efficiency energy regenerative shock absorber using supercapacitors for renewable energy applications in range extended electric vehicle,” Appl. Energy, vol. 178, pp. 177–188, 2016.

Y. Wang et al., “A renewable low-frequency acoustic energy harvesting noise barrier for high-speed railways using a Helmholtz resonator and a PVDF film,” Appl. Energy, vol. 230, no. July, pp. 52–61, 2018.

X. Zhang, Z. Zhang, H. Pan, W. Salman, Y. Yuan, and Y. Liu, “A portable high-efficiency electromagnetic energy harvesting system using supercapacitors for renewable energy applications in railroads,” Energy Convers. Manag., vol. 118, pp. 287–294, 2016.

M. Guan and W. H. Liao, “Design and analysis of a piezoelectric energy harvester for rotational motion system,” Energy Convers. Manag., vol. 111, pp. 239–244, 2016.

B. Li, A. J. Laviage, J. H. You, and Y. J. Kim, “Harvesting low-frequency acoustic energy using multiple PVDF beam arrays in quarter-wavelength acoustic resonator,” Appl. Acoust., vol. 74, no. 11, pp. 1271–1278, 2013.

M. Fayyadl, J. Fisika, and F. Uns, “Sound Level Meter Extech RS-232 .”

Published

2020-12-15

How to Cite

Utomo, I. S., Prasetya, H. W., & Kurniawan, M. A. (2020). STUDI SIMULASI PENGARUH VARIASI UKURAN PIEZOELEKTRIK DAN KEBISINGAN LOKOMOTIF KERETA TERHADAP TEGANGAN DENGAN MENGGUNAKAN ANSYS. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 4(2), 111–116. https://doi.org/10.37367/jpi.v4i2.106

Similar Articles

1 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.