Rancang Bangun Teknologi Automatic Surface Treatmen Untuk Meningkatkan Ketahanan Jalan Rel Kereta Api
DOI:
https://doi.org/10.37367/jpi.v5i1.129Keywords:
Keywords: Design, Automatic Surface Treatment, Railroad Tracks, TrainAbstract
The rail rod functions as a load that holds the weight of the train traveling on it. The large circuit weight can result in excessive friction and wear, requiring a hard, wear-resistant rail surface. The purpose of this research is to design a prototype tool which serves as an effort to increase the resistance on the rail road surface. The method used in the concept of this research is the flame hardening theory, namely heating the railroad using oxy-acetylene gas then quenching quickly to increase the hardness on the railroad surface. Prototyping begins with hardware design which includes Surface Treatment tools and designing automatic control program software. The results of the prototype were tested for the successful functioning of a tool that can be operated properly using manual mode with a maximum speed of 0.1 m/s and an automatic mode of 0.08 m/s.
Downloads
References
Eko Surojo., Dody Ariawan., Muh. Nurkhozin., 2009. Pengaruh Manual Flame Hardening Terhadap Kekerasan Hasil Tempa Baja Pegas, Jurnal Mekanika, Universitas Sebelas Maret Surakarta, Vol. 7 No. 2 I
Clark, D. S., Varney W. R., 1962. Physical Metallurgy For Engineering, D. Van Nostrand Company, INC.
Davis, J.R., 2002. Surface Hardening Of Steels, New York: McGraw-Hill
Hernandez, et. Al., 2011. Properties And Microstructure Of High-Performance Wheels. Journal of wear 271, 374-381.
Hari Boedi, Willy Artha Wirawan, Fadli Rozaq, Dadang Sanjaya Atmaja. (2020). The Effect Of Quenching Media On Surface Treatment Process On The Rel UIC R42 (Union Internasionale Des Chemins De Fer-42) Endurance. International Journal of Advanced Science and Technology, 29(6s), 1329 - 1336.
Jae Lee, Seok., 2005. Effect Of Austenite Grain Size On Martensitic Transformation Of A Low Alloy Steel. Materials science forum, Vol. 475-479, 3619-3192.
Krauss, George., 1990. Steel: Heat Treatment And Processing Principles, Ohio: ASM International
Folkhard, Erich, 1984. Welding MetallurgynOf StainlessnSteel, Spring-Verlig Wien, New York.
Pnagiotidis, Antonatos A.S., and Tsananas, G.M., 2007. Case Depth Determination Using Vicker Micro-Hardness Test Method At TRSC/PPC SA. Journal pf wear 273, 223-229.
Poshmann, Tsapowetz, Rinhover., 2009. Heat Treatment Process And Facility For Railway Wheel. AFT and Werkst off Service
Smith, J.L., Russel, G.M., & Bhatita, S.C., 2009. Heat Treatment Of Metals Volume 1, Singapore: Alkem Company.
Totten, G.E., Howes, M.A.H., 1997, SteelnHeat TreatmentnHandbook. New York: Marcel Dekker, Inc., USA.
Vander Voort, G.F., 1984. Metallography Principle And Practice. New York: Mc. Graw Hill Book Company.
Yokoyama, Hiroyasu., 2002. Development Of Hight Strength Pearlitic Seel Rail (SP Rail) With Excellent Wear And Damage Resistance. Journal of materials processing technology 166, 111-115.
W.A. Wirawan, H.B. Wahjono, & F. Rozaq., Desain Prototype Teknologi Automatic Surface Treatmen Untuk Meningkatkan Ketahanan Jalan Rel Kereta Api. Jurnal Perkeretaapian Indonesia, Vol. 4, No. 1, 2020. Hal. 75-79.
W.A. Wirawan, Adya Aghastya, & Alvi Lutfiyani Lailya., Modeling of Atmega 2560 Microcontroller-Based Train Passenger Counter. Jurnal Perkeretaapian Indonesia, Vol. 3, No. 1, 2019. Hal. 55-61.
Downloads
Published
How to Cite
Issue
Section
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal).