ALAT ANGKUT SERBAGUNA UNTUK MENUNJANG KEGIATAN KELOMPOK TANI CEMPAKA II, DESA ANDAMAN 1, ANJIR PASAR, BARITO KUALA

Authors

  • Akhmad Syarief Universitas Lambung Mangkurat
  • Fadliyanur Universitas Lambung Mangkurat
  • Dhanu Suryanta Universitas Lambung Mangkurat
  • A'yan Sabitah Politeknik Negeri Banjarmasin

DOI:

https://doi.org/10.37367/jpm.v3i1.241

Keywords:

Transport Equipme;, Tractor ; PKM

Abstract

The following program of Mandatory Serving Lecturers involves the Implementation Team of the Mechanical Engineering Study Program, Lambung Mangkurat University with partners from farmer groups. Mitra is a farmer group located in Andaman Village, Anjir Pasar District, Barito Kuala Regency. Some of the problems faced by Partners at this time are the less than optimal use of tractors, where tractors are only used as plow tools, and the plowing time is only about 4 months, when the plowing season is over, the tractors are only stored and not used for 8 months. These problems made the PKM team from the mechanical engineering study program at Lambung Mangkurat University invite to cooperate with farmer groups, where the PKM team provided knowledge and assistance in the form of goods, especially by designing a conveyance with a tractor drive. The methods used in this activity include literature studies, tool design, tool manufacture, handover of tools to partners. The results of the activity obtained a design and conveyance, where the conveyance is driven by a tractor and can be used by farmers to carry out harvesting activities and transport for other purposes. The manufacture of this conveyance can answer the partner's problems to maximize the work of the tractor which was previously only used for 4 months to be throughout the year

References

Akbar Prayoga (2017). RANCANG BANGUN GEROBAK ANGKUT RODA TIGA BERPENGGERAK MOTOR BENSIN DENGAN KAPASITAS BEBAN ANGKUT MAKSIMAL 150 KG (PROSES PEMBUATAN). Laporan Tugas Akhir pada Politeknik Negeri Sriwijaya Jurusan Teknik Mesin Palembang.

Bachtiar Setyo Nugroho. (2018). PERANCANGAN GEROBAK BERMOTOR DENGAN METODE REVERSE ENGINEERING (STUDI KASUS : USAHA DAGANG SETYO NUGROHO). Laporan Skripsi pada Program Studi Teknik Industri Fakultas Teknik Universitas Muhammadiyah Surakarta .

Kuncoro, Achmad (2018). RANCANG BANGUN ALAT BANTU ANGKUT DENGAN KAPASITAS 120 KG. Laporan Tugas Akhir pada Politeknik Negeri Sriwijaya.

M. Yogi Pratama (2020). RANCANG BANGUN KERETA SORONG BERMESIN SARANA PENGANGKUTAN PADA PROSES PENGUMPULAN BUAH KELAPA SAWIT. Laporan Skripsi pada Program Studi Teknik Mesin Fakultas Teknik Universitas Tridinanti Palembang.

Roberta Zulfhi Surya, M. Gasali M., Rizki Juliarman (2018). PERANCANGAN PEGANGAN GEROBAK MENGGUNAKAN ERGONOMI PARTISIPATIF BAGI PETANI KELAPA SAWIT DI KABUPATEN INDRAGIRI HILIR, RIAU. Seminar Nasional Mesin dan Industri (SNMI XII) 2018.

Oskar Judianto, Wahyu Albin Tabran (2018). PEMODELAN GEROBAK DITARIK SEPEDA UNTUK WARGA SEKITAR PASAR IMPRES DURI KOSAMBI DI JAKARTA BARAT. Jurnal Inosains Volume 13 Nomor 1, Februari 2018

Downloads

Published

2023-05-10

How to Cite

Syarief, A. ., Fadliyanur, Suryanta, D. ., & Sabitah, A. (2023). ALAT ANGKUT SERBAGUNA UNTUK MENUNJANG KEGIATAN KELOMPOK TANI CEMPAKA II, DESA ANDAMAN 1, ANJIR PASAR, BARITO KUALA. Madiun Spoor : Jurnal Pengabdian Masyarakat, 3(1). https://doi.org/10.37367/jpm.v3i1.241

Issue

Section

Articles