Use of 3D Total Station and Autocad Civil for Grading Planning
DOI:
https://doi.org/10.37367/jpi.v1i2.41Keywords:
measurement, topography, total station, image, autocad civil 3D, design, gradingAbstract
This study was structured with the aim of carrying out topographic measurements and analyzing grading planning in the API Madiun campus area. The study was conducted using a Total Station measurement tool and a 3D Autocad Civil 3D imaging tool. Surveyor personnel used in carrying out measurements are surveyors who are trained using Total Station equipment. The study produced ten benchmark point (BM) locations as a measurement reference in areas within the Madiun API land. The topographic analysis results from the contour map identified the Madiun API land area as relatively flat with the difference between the lowest and highest elevation of 5.132 m with an average slope of 3.32%. The grading plan shows that there are two main areas that require landfills with the total pile volume requirement of 8,281.4 m3. Evaluation of the implementation of measurements shows the need for supervision and evaluation so as not to make mistakes that can occur by the measurement implementer. The use of Autocad Civil 3D software tools facilitates and accelerates the process of depicting engineering and land grading planning. Measurement with Total Station and depiction with Autocad Civil 3D needs to be optimized by integration into the lecture syllabus in order to become one of the soft skill competencies possessed by graduates of Building Engineering and Railways of API Madiun.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal).